Two neighbors on the same street in Georgia replaced their roofs in the same month. Both roofs measured close to 2,000 square feet. One paid $8,900. The other paid $13,600. Neither one got cheated. The difference was the shingle itself. One chose basic 3-tab shingles and the other chose thick architectural shingles with a longer warranty.
That gap is why a single average price can mislead you. This guide breaks the cost down by shingle type, by roof size and by the extras that push a quote up or down. Every figure comes from real 2026 cost data published by Angi, HomeAdvisor and Fixr.
Quick Answer: Most homeowners pay $7,500 to $24,000 for a full asphalt shingle roof replacement in 2026, with a national average near $10,500. Installed prices run $4 to $6 per square foot for 3-tab shingles, $4.50 to $7.50 for architectural shingles and $7 to $12 for luxury shingles. Labor makes up roughly half to 60 percent of the bill.
Want a number for your own roof? Our free shingle and material calculator works out how many shingles your roof needs and what they cost.
Asphalt Shingle Prices by Type
Asphalt shingles prices below are installed totals for a typical home, not material-only figures.
Asphalt shingles come in three main tiers. The jump from one tier to the next is smaller than most people expect, which is why architectural shingles now sit on most new roofs in the US.
| Shingle Type | Installed per Sq. Ft. | Per Roofing Square | 2,000 Sq. Ft. Roof | Typical Lifespan |
|---|---|---|---|---|
| 3-Tab | $4 to $6 | $400 to $600 | $8,000 to $12,000 | 20 to 25 years |
| Architectural | $4.50 to $7.50 | $450 to $750 | $9,000 to $15,000 | 25 to 30 years |
| Luxury / Designer | $7 to $12 | $700 to $1,200 | $14,000 to $24,000 | 30 to 50 years |
A roofing square equals 100 square feet of roof area. Roofers quote by the square, so a 2,000 square foot roof is a 20 square job.
3-Tab Shingles: The Budget Option
3-tab shingles are the flat, uniform strips you see on older homes and rental properties. The material alone costs about $0.70 to $2 per square foot, the lowest of any roofing material. They are light, quick to install and easy to repair one strip at a time. The trade-offs are a shorter life, a plain look and lower wind ratings than thicker shingles. Many manufacturers now push their architectural lines first, so the 3-tab shelf keeps getting smaller every year.
Architectural Shingles: The Popular Middle
Architectural shingles, also called dimensional shingles, stack two layers of asphalt for a thicker and more textured look. Material runs about $1 to $3 per square foot. Most lines carry wind ratings of 110 to 130 mph. Many also include algae protection that keeps black streaks off the roof in humid states. On a typical home the upgrade from 3-tab adds roughly $1,000 to $3,000 to the whole job. That upgrade buys five or more extra years of life. For most owners this tier is the sweet spot.
Luxury and Designer Shingles: The Premium Look
Luxury shingles are the thickest asphalt products on the market. They are shaped to copy the look of slate or cedar shake at a lower price than the real thing. They weigh far more per square, so your roofer will check that the deck and framing can carry them. You pay for curb appeal and the longest warranties in the asphalt family, with some lines rated for 50 years.
If you are still choosing between shingles and other materials, our roof replacement cost guide puts every common material side by side with prices and lifespans.
Shingle Roof Cost by Roof Size
Roof size is the single biggest factor in your quote. Remember that roof area is larger than floor area because the surface slopes. A 2,000 square foot home often carries 2,200 to 2,400 square feet of roof. The table below uses architectural shingles, the most common choice.
| Roof Size | Roofing Squares | Architectural Shingle Cost |
|---|---|---|
| 1,000 sq. ft. | 10 | $4,500 to $7,500 |
| 1,500 sq. ft. | 15 | $6,800 to $11,300 |
| 2,000 sq. ft. | 20 | $9,000 to $15,000 |
| 2,500 sq. ft. | 25 | $11,300 to $18,800 |
| 3,000 sq. ft. | 30 | $13,500 to $22,500 |
The chart and the tables tell the same story. Type sets the rate per square foot. Size decides how many square feet you pay for. Get those two right and any quote you receive becomes easy to judge.
A Real Example: A 2,000 Sq. Ft. Architectural Roof
Here is how one typical job in the middle of the range adds up. The homeowner chose architectural shingles with a full tear-off of one old layer.
| Cost Item | Price |
|---|---|
| Shingles, underlayment and accessories | $3,600 |
| Labor | $6,500 |
| Tear-off and disposal of the old roof | $1,400 |
| Permit and fees | $400 |
| Total | About $11,900 |
Notice how much of the bill is labor. HomeAdvisor cost data puts labor near 60 percent of a shingle roof total on many jobs. That is why quotes for the same shingles can differ by thousands between companies. Crew size, local wages and roof difficulty all sit inside that one line.
What Drives the Price Up or Down
Roof pitch and complexity. A steep roof or a roof cut into many sections with valleys, dormers and chimneys takes more labor hours and more safety equipment. Simple gable roofs sit at the low end of every range in this guide.
Tear-off layers. Removing the old roof costs $1 to $5 per square foot depending on the number of layers and local dump fees. A second old layer hiding under the first is one of the most common surprise charges in roofing.
Decking repairs. Once the old shingles come off, rotted or soft decking has to be replaced before the new roof goes on. Budget $2 to $7 per square foot of damaged area, or ask your roofer for a per-sheet price in writing before work starts.
Permits. Most cities require a roofing permit. Angi suggests budgeting $250 to $500 depending on your jurisdiction. Your contractor usually pulls it, but the fee still lands in your quote.
Where you live. Labor rates move the total more than material prices do. Angi city guides put the average shingle roof near $11,928 in Los Angeles, about $10,353 in Houston and about $10,049 in Indianapolis. The same roof can cost 20 percent more or less based on your zip code alone. Our roof replacement cost in Texas guide breaks the state down city by city. Our roof replacement cost in Florida guide shows what hurricane codes do to prices. Our roof replacement cost in California guide shows what coastal labor does to shingle prices.
How Long Does a Shingle Roof Last?
A 3-tab roof usually lasts 20 to 25 years. Architectural shingles reach 25 to 30 years in most climates. Luxury lines can go 30 to 50 years. Heat, attic ventilation and storm exposure decide which end of the range your roof lands on.
The colored granules on top of each shingle do more than add color. They shield the asphalt from sunlight. When granules start washing into your gutters in handfuls, the shingles below are aging fast even if no leak has started yet. Inspectors read those aging signs up close. Our roof inspection cost guide shows what the visit costs in 2026.
Small problems stay cheap when you catch them early. A lifted shingle, a cracked vent boot or worn flashing usually costs a few hundred dollars to fix. Our roof repair cost guide lists what common repairs run in 2026, problem by problem.
Shingles or Metal: The Short Version
Shingles win on upfront price by a wide margin. A metal roof on the same home costs roughly double, often $16,000 to $32,000 for a 2,000 square foot steel roof. Metal answers back with a 40 to 70 year lifespan, which can mean one metal roof instead of two or three shingle roofs. If you plan to stay in the home for decades, run the long math before you decide. Our metal roof cost guide shows the full 50-year comparison.
How to Save Money on a Shingle Roof
Get three written quotes. Prices for the same job often spread by 30 percent or more between companies. Written quotes also expose what each roofer includes for tear-off, underlayment and disposal.
Ask about slower months. In many regions late fall and winter are slow for roofers. Some companies discount to keep crews busy. Mild weather areas feel this effect the most.
Stay with architectural unless looks rule. Luxury shingles mostly buy appearance. Architectural lines deliver most of the lifespan and wind protection for far less money.
Do the tear-off now. Laying new shingles over an old layer saves money today, but it hides deck damage and can shorten the new roof's life. A clean tear-off is the cheaper choice across 25 years.
Check your insurance after storms. Wind and hail damage is often covered minus your deductible. Wear from age is not covered, so file only when a real storm event is on record.
Frequently Asked Questions
How much does it cost to reshingle a 2,000 square foot roof?
Expect $8,000 to $12,000 for 3-tab shingles, $9,000 to $15,000 for architectural shingles and $14,000 to $24,000 for luxury shingles, including tear-off and installation.
How much is one roofing square installed?
One square covers 100 square feet. Installed prices run $400 to $600 per square for 3-tab, $450 to $750 for architectural and $700 to $1,200 for luxury shingles.
How long does a shingle roof installation take?
Most single-family homes are finished in one to three days. Steep roofs, multiple layers to remove and bad weather stretch the schedule.
Can new shingles go over old shingles?
Some local codes allow one extra layer. Skipping the tear-off saves money upfront. The risk is hidden deck damage and heat buildup that shortens the new roof's life. Most roofers recommend a full tear-off.
Are architectural shingles worth the extra cost?
For most homes, yes. The price gap over 3-tab is small per square foot. You gain a thicker shingle, better wind ratings and about five extra years of life.
Does homeowners insurance pay for a new shingle roof?
Insurance usually pays when a storm, fallen tree or fire damages the roof, minus your deductible. It does not pay for a roof that simply wore out with age.
The Bottom Line
Budget $4 to $6 per square foot for basic 3-tab shingles, $4.50 to $7.50 for architectural and $7 to $12 for luxury lines. For the average 2,000 square foot roof, that means a total near $10,500 for the shingles most Americans choose. Measure your roof, pick your tier and get three written quotes before you sign anything. A new shingle roof lasts about as long as a new AC unit. Our AC replacement cost guide shows what that cooling system runs.
Prices in this guide are national ranges cross-checked from Angi, HomeAdvisor and Fixr cost data for 2026. Your quote will vary with roof size, pitch, materials and local labor rates. Always get written quotes from licensed local roofers before you decide. If your heating and cooling both need replacing, our new HVAC system cost guide covers the full job.
See also: our furnace replacement cost guide.
If you are weighing a heat pump instead, our heat pump cost guide covers that option.
Planning a room with no ducts? See our ductless mini-split cost guide for 2026 prices by zone.
Is your AC acting up? See our AC repair cost guide for 2026 prices by part and system type.
Want to keep your system running well? See our HVAC maintenance cost guide for 2026 tune-up prices by system type and task.
Thinking about solar? See our solar panel installation cost guide for 2026 prices by system size, state and panel type.
Replacing a water heater? See our water heater cost guide for 2026 replacement prices by type, size and fuel.
Heating water with the sun? See our solar water heater cost guide for 2026 installed prices by system type and tank size.
Planning a kitchen remodel? See our kitchen remodel cost guide for 2026 prices by scope, size and part.
Planning a bathroom remodel? See our bathroom remodel cost guide for 2026 prices by scope, size and part.
Replacing a roof in Jacksonville? See our roof replacement cost in Jacksonville FL guide for 2026 prices by material, size and permit.




Comments
Post a Comment